Sand Calculator

Use the Sand Calculator to estimate compacted sand volume, cubic yards, weight, bulk tons, bags and material cost from measured dimensions.

Home & Construction Calculators

Enter the finished area, compacted sand depth and supplier data. The result separates base volume from the quantity adjusted for compaction and handling loss.

About the Sand Calculator

This calculator converts rectangular area and depth into compacted cubic feet and cubic yards, then applies a user-selected allowance. It reports both bulk weight and whole bags so users can compare purchase methods.

Formula and assumptions

Base volume = length × width × depth ÷ 12. Adjusted volume = base volume × (1 + allowance ÷ 100). Weight = adjusted volume × density. Tons = weight ÷ 2,000. Bags = weight ÷ bag weight, rounded up.

Worked example

A 20 × 10 ft area at 4 in deep has 66.67 ft³, or 2.47 yd³. With 10% allowance and 100 lb/ft³ density, order about 3.67 tons or 147 bags of 50 lb.

Measurement checklist

  • Use compacted depth rather than loose delivered depth.
  • Separate bedding, concrete and masonry sand requirements.
  • Confirm bulk density and minimum delivery charges.
  • Measure irregular sections separately.

Manual calculation steps

  1. Convert depth from inches to feet.
  2. Multiply length, width and depth.
  3. Add the allowance.
  4. Multiply by density for pounds.
  5. Convert to tons or divide by bag weight.

Frequently asked questions

How many cubic feet are in a cubic yard?

There are 27 cubic feet in one cubic yard.

Why does wet sand weigh more?

Moisture increases delivered weight without increasing the dry sand volume.

Should I buy bags or bulk?

Compare total quantity, delivery charges, access and handling needs.

Common mistakes

  • Mixing feet and inches.
  • Using product assumptions from a different installation.
  • Rounding down purchase quantities.
  • Treating a planning estimate as a final professional specification.