Use the Paver Sand Calculator to estimate bedding-sand volume, adjusted weight, whole purchase units and material cost for a rectangular paver area.
Home & Construction Calculators
Enter the compacted bedding depth—not the full excavated base depth—and supplier density and package yield.
About the Paver Sand Calculator
This calculator converts surface area and bedding depth into cubic feet and cubic yards. It then estimates adjusted weight and whole bags or bulk units using editable supplier data.
Formula and assumptions
Base volume = length × width × depth ÷ 12. Adjusted volume = base volume × (1 + waste ÷ 100). Weight = adjusted volume × density. Purchase units = adjusted volume ÷ unit yield, rounded up. Total cost = units × unit price + delivery.
Worked example
A 20 × 10 ft area with a 1 in bedding layer has 16.67 ft³ before allowance. With 10% waste it needs 18.33 ft³. At 0.5 ft³ per bag, purchase 37 bags.
Measurement checklist
- Separate bedding sand from base aggregate and joint sand.
- Use compacted rather than loose design depth.
- Confirm bag yield or bulk density with the supplier.
- Allow for uneven grade and handling loss where appropriate.
Manual calculation steps
- Multiply area by depth converted to feet.
- Add the selected compaction and waste allowance.
- Convert cubic feet to cubic yards by dividing by 27.
- Multiply by density for weight.
- Divide by package yield and round up.
Frequently asked questions
Is 1 inch always correct?
No. Use the compacted bedding thickness specified for the paver system.
Does this include joint sand?
No. Joint sand depends on paver dimensions, joint width and product coverage.
Why can delivered weight differ?
Moisture, gradation, compaction and supplier density assumptions affect weight.
Common mistakes
- Mixing feet and inches.
- Using product assumptions from a different installation.
- Rounding down purchase quantities.
- Treating a planning estimate as a final professional specification.