Use the Roadway Fill Volume Calculator to estimate compacted fill from roadway length and a trapezoidal cross-section, then convert volume to cubic yards and tons.
Home & Construction Calculators
Enter the roadway length, bottom width, top width and average fill depth. The trapezoidal method is more useful than a simple rectangular box when side slopes widen the base.
About the Roadway Fill Volume Calculator
This calculator models a uniform roadway-fill section as a trapezoidal prism. It is suitable for preliminary planning when the bottom is wider than the finished roadway platform.
Formula and assumptions
Cross-sectional area = (top width + bottom width) ÷ 2 × average depth. Compacted volume = cross-sectional area × length. Order volume = compacted volume × (1 + allowance ÷ 100). Tons = order volume × density ÷ 2,000.
Worked example
A 500 ft section with a 24 ft top, 30 ft bottom and 2 ft average depth has a 54 ft² cross-section and 27,000 ft³, or 1,000 yd³, of compacted fill. A 15% allowance gives 1,150 yd³.
Measurement checklist
- Break changing profiles into separate stations or sections.
- Use surveyed dimensions when available.
- Confirm whether density applies to compacted or loose material.
- Account for unsuitable material, settlement and balancing separately.
Manual calculation steps
- Average the top and bottom widths.
- Multiply by average depth for cross-sectional area.
- Multiply by roadway length.
- Convert cubic feet to cubic yards.
- Apply the allowance and density.
Frequently asked questions
Why use a trapezoid?
Roadway embankments commonly widen toward the base because of side slopes.
Can one average depth cover a long road?
Only for early planning. Divide variable terrain into surveyed sections.
Is loose volume the same as compacted volume?
No. Shrink and swell depend on material and compaction requirements.
Common mistakes
- Mixing feet and inches.
- Using product assumptions from a different installation.
- Rounding down purchase quantities.
- Treating a planning estimate as a final professional specification.