Pavement Calculator

Use the Pavement Calculator to estimate asphalt surface and aggregate-base quantities separately for a rectangular driveway, parking area or roadway section.

Home & Construction Calculators

Enter finished area and compacted layer depths. Separate densities and prices keep the asphalt and aggregate estimates transparent.

About the Pavement Calculator

This calculator treats asphalt and aggregate base as two separate compacted layers. It reports cubic yards, tons and cost for each so users can check quotations and delivery planning.

Formula and assumptions

Layer volume = length × width × depth ÷ 12. Adjusted volume = layer volume × (1 + overage ÷ 100). Layer tons = adjusted volume × layer density ÷ 2,000. Total cost = asphalt tons × asphalt price + base tons × base price + other costs.

Worked example

A 100 × 20 ft area with 3 in asphalt and 6 in base contains 18.52 yd³ of asphalt and 37.04 yd³ of base before overage. At 5% overage, the estimated weights are about 38.06 and 55.13 tons.

Measurement checklist

  • Use compacted layer thicknesses.
  • Confirm asphalt mix and aggregate density.
  • Include transitions and irregular widening.
  • Budget excavation, drainage, tack coat and mobilization separately.

Manual calculation steps

  1. Find the plan area.
  2. Calculate each layer volume using its depth.
  3. Add overage to each layer.
  4. Multiply by the appropriate density.
  5. Convert to tons and apply unit prices.

Frequently asked questions

Can I use one density for both layers?

No. Asphalt and aggregate base normally have different compacted densities.

Does this design pavement thickness?

No. Thickness depends on traffic, soil support, drainage and local specifications.

Why price layers separately?

They are supplied, installed and priced differently.

Common mistakes

  • Mixing feet and inches.
  • Using product assumptions from a different installation.
  • Rounding down purchase quantities.
  • Treating a planning estimate as a final professional specification.