Use the Asphalt Milling Calculator to estimate removed asphalt volume, reclaimed material weight, truckloads and preliminary milling and disposal cost.
Home & Construction Calculators
Enter the milled area, average removal depth and reclaimed-asphalt density. Cost inputs separate area-based milling from ton-based hauling or disposal.
About the Asphalt Milling Calculator
This calculator converts pavement area and removal depth into compact volume and reclaimed-asphalt weight. A swell allowance estimates loose handling volume, while truckloads are based on weight.
Formula and assumptions
Area = length × width. Compact removed volume = area × depth ÷ 12. Loose volume = compact volume × (1 + swell ÷ 100). Tons = compact volume × density ÷ 2,000. Truckloads = tons ÷ payload, rounded up. Cost = area × milling rate + tons × disposal rate + fixed costs.
Worked example
A 200 × 24 ft section milled 2 in deep removes 800 ft³, or 29.63 yd³, of compact asphalt. At 140 lb/ft³, that is 56 tons, requiring three 20-ton truckloads.
Measurement checklist
- Separate sections with different milling depths.
- Confirm whether rates include sweeping and traffic control.
- Check legal truck payload and haul distance.
- Clarify ownership and reuse value of reclaimed asphalt.
Manual calculation steps
- Multiply length by width for milled area.
- Multiply by removal depth converted to feet.
- Apply swell to find loose handling volume.
- Use compact volume and density for tons.
- Calculate trucks and separate cost components.
Frequently asked questions
Is swell applied to weight?
No. Swell changes loose volume, while material mass remains approximately the same.
Can reclaimed asphalt reduce cost?
Possibly, depending on ownership, reuse options, transport and local market terms.
Does the estimate include traffic control?
Only if included in the fixed-cost value you enter.
Common mistakes
- Mixing feet and inches.
- Using product assumptions from a different installation.
- Rounding down purchase quantities.
- Treating a planning estimate as a final professional specification.