Use the Tile Cost Calculator to estimate whole tile boxes, material cost, installation labor and a preliminary project total.
Home & Construction Calculators
Estimate one rectangular tile surface. Waste is applied to purchased tile; labor is calculated from the net installation area.
About the Tile Cost Calculator
This calculator separates purchase quantity from installed area. Tile boxes are rounded up after waste, while labor uses the measured net area unless your quote specifies another basis.
Formula and assumptions
Net area = length × width. Purchase area = net area × (1 + waste ÷ 100). Boxes = purchase area ÷ box coverage, rounded up. Material cost = boxes × box price. Labor = net area × labor rate. Total = material + labor + other costs.
Worked example
Select Load example to reproduce this scenario. A 12 × 10 ft floor is 120 ft². With 10% waste and 12 ft² per box, buy 11 boxes. At $30 per box, $8 per ft² labor and $100 other costs, the preliminary total is $1,390.
Measurement checklist
- Use actual box coverage and price.
- Increase waste for diagonal or complex patterns.
- Clarify what the labor quote includes.
- Budget separately for substrate and waterproofing work.
Manual calculation steps
- Multiply length by width.
- Add the chosen waste percentage.
- Divide by box coverage and round up.
- Multiply boxes by box price.
- Add net-area labor and fixed costs.
Frequently asked questions
Is waste added to labor?
Not in this tool; labor uses the installed net area.
Are thinset and grout included?
Only if you add them to other fixed costs.
Why can a contractor quote differ?
Preparation, access, pattern, local rates and job minimums can change the price.
Common mistakes
- Mixing feet and inches.
- Using product assumptions from a different installation.
- Rounding down purchase quantities.
- Treating a planning estimate as a final professional specification.