Home & Construction Calculators
Use this tank volume and fill calculator to estimate total capacity, filled volume, remaining space, gallons, liters, fluid weight, and preliminary water-storage cost.
About the Tank Volume and Fill Calculator
This tank volume calculator estimates full capacity, filled volume, remaining space, gallons, liters, fluid weight, and preliminary cost. It supports rectangular tanks and vertical cylindrical tanks using inside dimensions.
Formula and assumptions
Rectangular volume = length × width × height. Cylindrical volume = π × radius² × height, where diameter is entered as length. Convert cubic feet to U.S. gallons by multiplying by 7.48052, then multiply by 3.78541 for liters. Filled volume = full capacity × fill percentage.
Worked example
For a rectangular tank measuring 20 ft × 10 ft × 4 ft, the full capacity is about 5,984.4 gallons. At 75% fill, the active volume is about 4,488.3 gallons and the remaining space is about 1,496.1 gallons. At 8.34 lb/gal, the fluid weighs about 37,433 lb. The sample cost estimate adds fluid cost and delivery or installation.
Measurement checklist
- Measure inside length, width, diameter, and height.
- Confirm the manufacturer rated capacity.
- Reserve safe freeboard and account for overflow protection.
- Check fluid compatibility, ventilation, access, and support.
- Include pumps, pipes, fittings, delivery, and installation separately.
Manual calculation steps
- Identify the tank shape.
- Calculate cubic feet using the matching geometry.
- Convert cubic feet to gallons and liters.
- Apply the desired fill percentage.
- Calculate remaining space and fluid weight.
- Add fluid, delivery, installation, and equipment costs.
Common mistakes
- Using outside dimensions instead of inside dimensions.
- Filling to 100% when freeboard is required.
- Confusing gallons with liters.
- Ignoring tank support and fluid weight.
Frequently asked questions
How do I calculate a cylindrical tank?
Select vertical cylindrical tank, enter the inside diameter as length, and enter the inside height. The calculator uses πr²h.
Why not fill a tank completely?
Freeboard may be needed for expansion, waves, overflow control, thermal changes, and safe operation.
What does fluid density change?
Density changes the estimated weight. Water is about 8.34 lb per U.S. gallon, while other fluids may differ.
Is this a structural tank design?
No. Confirm tank rating, foundation, supports, connections, permits, and safety requirements with the manufacturer or a qualified professional.
Save and compare Tank Volume and Fill Calculator results
After calculating, copy the result for a note or message, print the complete page as a PDF, or download a CSV file containing the inputs and result. Reset restores the original example values, clears the result, and lets you test another scenario without reloading the page.
For a useful comparison, export the first scenario, change one assumption at a time, and calculate again. This makes it easier to see which measurement or allowance has the largest effect on the estimate.
Measure usable internal capacity
Use internal dimensions when estimating liquid capacity. Wall thickness, end caps, fittings, sediment, and required headspace can make usable capacity smaller than the external geometric volume. For irregular tanks, use the manufacturer’s calibration chart rather than assuming a perfect geometric shape.
Check orientation and fill depth
A horizontal cylinder does not fill linearly with liquid depth: half the depth gives half the volume, but other depth fractions do not equal the same volume fractions. Confirm whether the selected shape is horizontal or vertical and measure depth from the tank’s lowest internal point. Do not use this planning estimate for custody transfer, pressure-vessel certification, or hazardous-material filling limits.