Carpet Calculator estimates a rectangular room’s floor area, waste-adjusted carpet and padding quantities, and an itemized material and installation budget in square feet and square yards.
Home & Construction Calculators
Enter one room at a time. Use the retailer’s quoted prices per square yard; the calculator converts the measured floor area automatically.
What the estimate includes
The calculator separates net floor area from the purchase area after waste. Carpet and padding costs use the waste-adjusted area. Installation uses the net room area, while the fixed-cost field can include removal, delivery, stairs, transitions, furniture moving, or minimum service charges.
Formula
Net area (ft²) = length × width. Net area (yd²) = net area ÷ 9. Purchase area = net area × (1 + waste ÷ 100). Carpet cost = purchase area in yd² × carpet price. Padding cost uses the same purchase area. Installation cost = net area in yd² × installation rate. Total = carpet + padding + installation + fixed costs.
Worked example
Select Load example for a 15 ft × 12 ft room. The net area is 180 ft², or 20 yd². With 10% waste, the purchase estimate is 198 ft², or 22 yd². At $28/yd² carpet, $6/yd² padding, $9/yd² installation, and $125 fixed costs, the estimated total is $1,053.
Measurement checklist
- Measure closets, alcoves, and connected sections separately.
- Note doorways, transitions, stairs, fireplaces, and built-ins.
- Ask the supplier whether the quoted price is per square foot or square yard.
- Confirm roll width, pattern repeat, nap direction, seam placement, and minimum-order rules.
Manual calculation steps
- Multiply room length by width to find square feet.
- Divide square feet by 9 to convert to square yards.
- Apply the waste percentage to carpet and padding quantities.
- Multiply adjusted square yards by each material rate.
- Multiply net square yards by the installation rate.
- Add fixed preparation, delivery, removal, or transition costs.
Frequently asked questions
How much extra carpet should I allow?
Ten percent is a common early-planning allowance for a simple room, but patterned carpet, multiple seams, unusual shapes, or fixed roll widths may require more. Confirm the final layout with the installer.
Why are square yards shown?
Many carpet retailers quote carpet and padding by the square yard. One square yard equals 9 square feet.
Does waste apply to installation labor?
This calculator applies installation labor to net floor area. Contractors may bill differently or impose minimum charges, so use the wording in the quote.
Common mistakes
- Dividing square feet by 3 instead of 9.
- Ignoring closets, pattern repeat, or roll direction.
- Comparing per-foot and per-yard prices without converting units.
- Ordering from area alone without a seam layout.