Bar to PSI Converter instantly converts pressure from bar to pounds per square inch (psi), with a reverse PSI-to-bar option, clear working, and downloadable results.
Convert bar, PSI, and other pressure units
Negative signed gauge-pressure differences are accepted. Unit conversion does not change gauge pressure into absolute pressure.
Conversion result
How to convert bar to PSI
One bar equals exactly 100,000 pascals and approximately 14.5037738 psi. Multiply bar by 14.5037738 to convert to psi. For the reverse conversion, divide psi by 14.5037738.
PSI = bar × 14.5037738
bar = PSI ÷ 14.5037738
Practical example
A tire specification of 2.5 bar converts to 2.5 × 14.5037738 = 36.2594 psi. Always follow the pressure recommended by the equipment or vehicle manufacturer.
Common pressure reference points
- 1 bar ≈ 14.5038 psi
- 2 bar ≈ 29.0075 psi
- 2.5 bar ≈ 36.2594 psi
- 3 bar ≈ 43.5113 psi
- 10 bar ≈ 145.0377 psi
Bar, PSI, and gauge pressure
Bar is a metric pressure unit commonly used for tires, compressors, hydraulics, and weather instruments. PSI means pounds-force per square inch and is common in the United States. Confirm whether a specification uses absolute pressure or gauge pressure; this converter changes units only and does not add or subtract atmospheric pressure.
Is 1 bar exactly 14.5 PSI?
It is approximately 14.5 psi. For more accurate work, use 14.5037738 psi per bar.
Can I convert PSI back to bar?
Yes. Choose PSI as the starting unit. The calculator divides the value by 14.5037738.
Does temperature affect the conversion?
No. The unit relationship is fixed, although the actual pressure of a gas can change with temperature.
Sources and related tools
The bar is defined from the pascal in the SI system; see the NIST pressure-unit guidance. Explore more conversion calculators or use the PSI to Pascals Converter.
Using the Bar to PSI Converter accurately
Check the unit printed on the gauge, specification sheet, or equipment label before entering a value. Bar and psi describe the same physical quantity but use different scales. Keep more decimal places during technical work and round only the final answer. The converter shows the equation so you can verify the direction of the calculation.
Pressure conversion tips
For vehicle tires, compare the converted value with the manufacturer label, not the maximum pressure molded into the tire sidewall. For compressors and pneumatic tools, confirm the permitted operating range and whether the document uses gauge pressure. In engineering calculations, record the original value and its stated precision so the converted result does not imply more certainty than the source measurement provides.
A quick mental check helps catch unit mistakes. Since one bar is about 14.5 psi, a bar value should produce a psi result roughly fifteen times larger. In the other direction, a psi value should become a much smaller number in bar. If that pattern is reversed, check the selected starting unit.
More worked conversions
To convert 6 bar, multiply 6 by 14.5037738 to get approximately 87.0226 psi. To convert 100 psi back to bar, divide 100 by 14.5037738 to get approximately 6.8948 bar. The Bar to PSI Converter performs both operations and lets you select two, four, or six decimal places.
Do not use a unit conversion alone to decide whether equipment is safe. Pressure limits, temperature ratings, calibration, measurement uncertainty, and manufacturer instructions still apply. Use properly calibrated instruments and qualified technical guidance for safety-critical systems.
Bar to PSI Converter quick guide
Use the Bar to PSI Converter with current inputs, review the displayed equation or assumptions, and compare a second scenario before relying on the estimate. Save the CSV or printable PDF when you need a record of the result.