Pascals to PSI Converter: convert pascals (Pa) to pounds per square inch (psi), or enter a PSI value to calculate pascals. Both fields are editable, and the advanced selectors support other common pressure units without leaving this page.
Pascals to PSI Converter formula
Divide the pressure in pascals by 6,894.757293168.
psi = pascals ÷ 6,894.757293168
For example, 100,000 Pa ÷ 6,894.757293168 = 14.503773773 psi. The same pressure is 100 kPa because 1 kPa equals 1,000 Pa.
This relationship follows the international definitions of the pound and inch. NIST publishes approximately 6.894757 × 10³ Pa per psi in its SI conversion factors.
Pressure conversion scale
The same pressure expressed on four different unit scales.
What are pascals and PSI?
Pascal
The pascal is the SI derived pressure unit. One pascal equals one newton of force distributed over one square metre: 1 Pa = 1 N/m². Engineering specifications often use kPa or MPa because a single pascal is small.
Pound-force per square inch
PSI is a US customary and imperial pressure unit representing one pound-force applied over one square inch. It is common for vehicle tires, pneumatic equipment, compressors, hydraulic systems and pressure gauges.
Pascals to PSI conversion table
| Pascals | PSI | Kilopascals |
|---|---|---|
| 100 Pa | 0.014504 psi | 0.1 kPa |
| 1,000 Pa | 0.145038 psi | 1 kPa |
| 5,000 Pa | 0.725189 psi | 5 kPa |
| 10,000 Pa | 1.450377 psi | 10 kPa |
| 50,000 Pa | 7.251887 psi | 50 kPa |
| 100,000 Pa | 14.503774 psi | 100 kPa |
| 200,000 Pa | 29.007548 psi | 200 kPa |
| 1,000,000 Pa | 145.037738 psi | 1,000 kPa |
Pascals to PSI conversion examples
Tire-pressure specification
A specification of 240,000 Pa equals approximately 34.809057 psi, or 240 kPa.
Low-pressure laboratory reading
A reading of 2,500 Pa equals approximately 0.362594 psi.
Reverse calculation
To convert PSI to pascals, multiply by 6,894.757293168. For example, 15 psi equals approximately 103,421.359398 Pa.
Accuracy and input checks
- Decimals and negative signed pressure differences are accepted.
- Very large or small results automatically use scientific notation when appropriate.
- Rounding changes only the displayed value, not the internal calculation.
- Do not confuse Pa with kPa; they differ by a factor of 1,000.
- Confirm whether a specification uses gauge, absolute or differential pressure.
Pascals to PSI FAQs
How much PSI is one pascal?
One pascal equals approximately 0.000145037738 psi.
Is PSI the same as PSF?
No. PSI is pound-force per square inch, while PSF is pound-force per square foot. One psi equals 144 psf.
Can this converter handle negative pressure?
Yes for signed gauge pressure or pressure differences. Absolute pressure should not be negative.
Why is the PSI result much smaller?
One PSI contains thousands of pascals, so the same pressure has a much smaller numerical value when expressed in PSI.
Should I convert Pa or kPa to PSI?
Either works if the unit is selected correctly. For everyday pressures, kPa is usually easier to read; 240,000 Pa and 240 kPa both equal about 34.809 psi.